Oil pressure sender
Posted: Fri Feb 22, 2019 3:09 pm
Hi all. Would anyone know the part number for a 96 SB oil pressure sender please. I’ve googled it but there seems to be lots listed at different pressure range. Thanks
Thanks very much for taking the time Barry, my gauge only goes to 80 psi so I’m assuming I need an 80 psi sender ? I checked on the Amazon link and they do an 80. Very helpful. These type senders seem to cover many pressure and resistance ranges. The 80 psi part number is 2241. I can get it through Amazon uk for £50.CanuckHoss wrote:This is all they show on the Dealer Net
7120112 oil pressure sender, 1997-2007 FOR 100 PSI ELECTRIC OIL PRESSURE (AUTOMETER) EA LIST $40.50
This looks like it here. BUT I can check a smallblock trike tomorrow and see if there is a part number on it..has tilt body so should be easy of there is a part number on it
https://www.amazon.ca/Auto-Meter-2242-Electric-
Pressure/dp/B00062YVIY
You are very welcome.knockdolian wrote:Thanks very much for taking the time Barry, my gauge only goes to 80 psi so I’m assuming I need an 80 psi sender ? I checked on the Amazon link and they do an 80. Very helpful. These type senders seem to cover many pressure and resistance ranges. The 80 psi part number is 2241. I can get it through Amazon uk for £50.CanuckHoss wrote:This is all they show on the Dealer Net
7120112 oil pressure sender, 1997-2007 FOR 100 PSI ELECTRIC OIL PRESSURE (AUTOMETER) EA LIST $40.50
This looks like it here. BUT I can check a smallblock trike tomorrow and see if there is a part number on it..has tilt body so should be easy of there is a part number on it
https://www.amazon.ca/Auto-Meter-2242-Electric-
Pressure/dp/B00062YVIY
Thanks again
Thanks chaps, I had a real problem locating a 2241 in the uk. I took my old one off and found it’s a VDO sender as is the gauge. I contacted VDO and gave them the numbers on it and they said I need a 5 bar sender which I have now ordered. I’m guessing but I think the sender must be compatible with the gauge as it works of resistance. Figure if I go with what’s there I can’t go wrong. VDO had to point out that the information I needed is stamped on the spanner flats. Who knew ? Thanks again for your time hope this info helps othersCanuckHoss wrote:Aftermarket Part number in Canada PS-154