BH trike rear brakes
BH trike rear brakes
Has any one replaced the whole rear braking system on a BH trike?, I mean, for the size, power and mass of this bikes, the rear brakes are very small and the trike is not to eager to stop on short notice, so I was wondering if anyone had replaced the rotors and calipers for something bigger that helps the trike to stop faster and better
if it has a solution, why to worry? and if not, why to worry?
Re: BH trike rear brakes
Ronald -
Check this out, I think it will answer you questions.
http://www.v8bikeriders.com/forums/show ... hp?t=22530
Don
PS
Sorry for outside link here but I wanted to be sure credit goes where it should for the info (Gruff)
Check this out, I think it will answer you questions.
http://www.v8bikeriders.com/forums/show ... hp?t=22530
Don
PS
Sorry for outside link here but I wanted to be sure credit goes where it should for the info (Gruff)
IF YOU TELL THE TRUTH YOU DON'T HAVE TO REMEMBER ANYTHING
Re: BH trike rear brakes
Ron,check out the rear disc brakes on the later BH trikes. They have larger diameter,vented rotors and huge calipers. I think the rotors are off a Ford Crown Victoria and calipers from a 2005-later Mustang GT.
Clint & Sherry
2006 Boss Hoss 57 trike (sold)
2006 Boss Hoss 57 trike (sold)
Re: BH trike rear brakes
Clint44 wrote:Ron,check out the rear disc brakes on the later BH trikes. They have larger diameter,vented rotors and huge calipers. I think the rotors are off a Ford Crown Victoria and calipers from a 2005-later Mustang GT.
When you say vented, do you mean drilled?
Re: BH trike rear brakes
Not Clint but I'll give this a go ... vented rotors are NOT drilled rotors. I have worked on plenty of Crown Vics and Grand Marq and the rotors were never drilled or slotted from factory. A vented rotor is not a solid rotor ... see below (if pics work)Mikie v wrote:Clint44 wrote:Ron,check out the rear disc brakes on the later BH trikes. They have larger diameter,vented rotors and huge calipers. I think the rotors are off a Ford Crown Victoria and calipers from a 2005-later Mustang GT.
When you say vented, do you mean drilled?
I believe this is what Clint was referring to, if I'm wrong then I apologize.
IF YOU TELL THE TRUTH YOU DON'T HAVE TO REMEMBER ANYTHING
Re: BH trike rear brakes
Gatcha, then yes I have vented rotors and Clint44 is correct I have a 12 Gangsta. Thanks V-Man
Re: BH trike rear brakes
You are welcome Mikie. I'm pretty sure Clint would know, he had a beautiful 57 BH Trike. If the rotors are from a CV you would be able to upgrade to drilled or slotted or drilled AND slotted. The upgrade would provide even better/faster heat dissipation.Mikie v wrote:Gatcha, then yes I have vented rotors and Clint44 is correct I have a 12 Gangsta. Thanks V-Man
I just finished a full brake job on my wifes Jetta Tdi and went with drilled and slotted rotors. The cost associated are worth it in my opinion ...
IF YOU TELL THE TRUTH YOU DON'T HAVE TO REMEMBER ANYTHING
Re: BH trike rear brakes
Don Would you consider putting disc brakes on Nancys trike as I think it needs Upgraded, I think she would approve in the name of safety!
Re: BH trike rear brakes
Might have to remove one and match it up against a CV at my local Auto store.
Re: BH trike rear brakes
I might consider it but never down in FL ... I don't have a lift or access to all my tools down there.tjy wrote:Don Would you consider putting disc brakes on Nancys trike as I think it needs Upgraded, I think she would approve in the name of safety!
Call BH and ask them the question ... they would know 100% what the application is OR at least they should!!Mikie v wrote:Might have to remove one and match it up against a CV at my local Auto store.
IF YOU TELL THE TRUTH YOU DON'T HAVE TO REMEMBER ANYTHING
Re: BH trike rear brakes
Tom, when you talk w/ BH also ask who made their calibers then go to that company's website, get their phone number and call and ask which pads they have that will stop quicker. Sometimes that may be the cure but definitely not as good as upgrading the calibers.
Buck
Buck
- CanuckHoss
- Site Sponsor
- Posts: 2293
- Joined: Mon Nov 23, 2009 11:10 am
- Location: Airdrie, Alberta, Canada
- Contact:
Re: BH trike rear brakes
Tom,tjy wrote:Don Would you consider putting disc brakes on Nancys trike as I think it needs Upgraded, I think she would approve in the name of safety!
Take it from me /us...whenever you do a conversion...or something different from the norm or stock....you can run into a whole gammit of WTF do we do now?....never has stumped us but a lot of times it takes way more time than a person thought and a lot of creativity...
I have not found that disc brakes on a trike are a whole lot better than drums on these trikes...that is if the drums are working properly...set properly...
CanuckHoss
Barry Radu, President Destination Cycles
Airdrie, Alberta Canada
"Just BE HAPPY!! BE HAPPY!! BE HAPPY!!"--Abraham
Barry Radu, President Destination Cycles
Airdrie, Alberta Canada
"Just BE HAPPY!! BE HAPPY!! BE HAPPY!!"--Abraham
Re: BH trike rear brakes
Our 57 had drum brakes. They worked ok but were not very linear,hard to tell where the lock-up point was,sometimes. I rode a 2012 trike and its rear brakes were very strong & linear.
Don,if that's true about the Crown Vic rotors,it's possible I might have the origin of the brake components,backwards.
Been a few years since Curtis Pyatt and I discussed that upgrade.
Don,if that's true about the Crown Vic rotors,it's possible I might have the origin of the brake components,backwards.
Been a few years since Curtis Pyatt and I discussed that upgrade.
Clint & Sherry
2006 Boss Hoss 57 trike (sold)
2006 Boss Hoss 57 trike (sold)